High Performance Copper Cable Granulator Machine Easy Operating
Processing Procedures:
- Put wires and cables into the crusher, in which they are crushed
and plastic sheath and copper separated completely. The length of
the crushed material is based on the mesh of the riddle: the bigger
the mesh is the longer the crushed material will be and the larger
the output will be. The mesh should be chosen in production
according to the type of the material.
- The crushed material (mixture of copper granules and plastic
pieces) is conveyed to the separator by the conveyor, during which
procedure dust and part of plastic pieces of light weight(including
fiber, rope, or tapes, etc. mixed in the wires) are collected by
the pressure-reducing blower. The above opening of the pressure
reducing blower is connected with the dust collector opening in
which a dust collecting bag is used to prevent discharge of dust
for the purpose of environmental protection. Dust and part of
plastic pieces of light weight are collected in this bag and will
be discharged when the bag is full.
- The separator is used for separating plastic pieces and copper
granules. According to the differences of the physical properties
and specific gravity between different materials, there is specific
gravity deviation under the forces of Aerodynamic and Vibration
friction. By adjusting the speed of material conveying and
amplitude parameters, copper granules (of larger specific gravity)
will move to the riddle bottom and move from down to up, and
plastic pieces (of smaller specific gravity) will move to the above
of copper granules and move from up to down, and in the end they
will both be discharged through different openings.
- All the units are installed on the Underbed to form a whole
structure. The machine is adjusted ready for production before
shipping, and the customer only need to connect it to the power
supply.
Features:
This scrap copper wire recycling machine is used for recycling
scrap copper wires and cables, like automobile wires,
telecommunication wires, and other kinds of copper wires, in order
to recover copper. This machine is consisted of Crusher, Crushed
Material Channel, Vibrating Separator, Air Blower, Dust Collector,
and the Underbed, etc..
FAQ
1. Is there quick-wear part on the machine?
The spare part of the machine is blades and screen, their use life
is more than 2 years, and we could also supply blade sharping
machine to you for maintenance.
2. What's the lognest continuous working time for the recycling
machine?
Normally 10 hours per day.
3. Is the machine easy to operate? How many workers required to
operate it?
We design precise but simple control system for the machine.
For single recycling machine, only one worker is required.
For complete recycling line, two workers are required.
